Loading... Please wait...

Categories

O-Ring, Black EPDM/EPR/Ethylene/Propylene Size: 928, Durometer: 70 Part Number: OREPDNSF70D928 (Min Qty: 30)

Hover over image to zoom

  • O-Ring, Black EPDM/EPR/Ethylene/Propylene Size: 928, Durometer: 70 Nominal Dimensions: Inner Diameter: 2 8/89(2.09) Inches (5.3086Cm), Outer Diameter: 2 19/59(2.322) Inches (5.89788Cm), Cross Section: 8/69(0.116) Inches (3mm) Part Number: OREPDNSF70D928
RRP: $3.13
$0.67 (You save $2.46)
SKU:
OREPDNSF70D928
Minimum Purchase:
30 unit(s)

 Product Description

Millions of people take the safety of their food, water and consumer products for granted on a daily basis. Why? Because of three letters: NSF. NSF certification is your key to making sure that the products you use meet strict standards for public health protection; EPDM 70 durometer NSF approved O-rings are your answer. In the rubber industry, the most important standard by far, is the NSF Standard 61. Rubber compounds submitted to NSF undergo rigorous testing to determine whether any contaminants leach or migrate from the material when in long term contact with drinking water, and if so, if the level of migration is acceptable from a public health viewpoint. These compounds also comply with FDA requirements. EPDM O-rings provide resistance to heat, water and steam, alkali, mild acidic oxygenated solvents, ozone and UV exposure. EPDM O-ring compounds also withstand the effect of brake fluids and Skydrol, and other hydraulic fluids. EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. NSF/ANSI Standard 61 is an US Standard issued by the National Sanitation Foundation which defines the acceptable levels of contaminating substances and impurities that may leach or migrate from components and devices into drinking water systems. Whether you manufacture valves, faucets, copper tubing, sinks, thermostatic mixing valves, backflow preventers, toilets, septic tanks, showers or practically any other type of plumbing product, NSF provides the testing and certifications you need to gain product acceptance and code compliance across North America. Faucets and plumbing products intended for contact with drinking water should be tested and certified to NSF/ANSI Standard 61. This American National Standard limits the amount of impurities that individual products can introduce into a home’s water supply, including lead and other metals, volatile organic chemicals, phthalates and bisphenol A.


  • EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer which is characterized by wide range of applications and good chemical resistance.
  • NSF-certified products are widely accepted by plumbing inspectors and code officials across North America especially for applications for potable water.
  • NSF 61 certification is your key to making sure that the products you use meet strict standards for public health protection.
  • NSF certification is your key to making sure that the products you use meet strict standards for public health protection.
  • EPDM/EPR "O" Rings have a service temperature range of -65°F (–54°C) to 300°F (149°C).

Dimensions:

Inner Diameter: 2 8/89 (2.09) Inches (5cm 3.09mm)

Outer Diameter: 2 19/59 (2.322) Inches (5cm 9.09mm)

Cross Section: 8/69 (0.116) Inches (3mm)


Amazon Part Number (ASIN): B01FYYGXES



Sur-Seal, Inc. Helpful O-Ring Selector

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Copyright 2017 Sur-Seal Inc.. All Rights Reserved.
Sitemap |

Click the button below to add the O-Ring, Black EPDM/EPR/Ethylene/Propylene Size: 928, Durometer: 70 Part Number: OREPDNSF70D928 (Min Qty: 30) to your wish list.