Teadit® 2236 valve packing is self-lubrificating, non-hardening, dimentionally stabe and resistant to gases and fluids as well as heat, pressure and chemicals. It's high temperature flexible graphite and Inconel® filament jacket affords mechanical stability while the advanced construction provides leakage control and high integrity in steam service. Due to its physical properties and ability to minimize friction. Teadit ® Style 2236 is ideal for valves and can be used within a broad range of applications.
Temperature ºF (ºC) | |
---|---|
Minimum | -400 (-240) |
Maximum | 850 (455) |
Steam | 1202 (650) |
Pressure psi (bar) | |
---|---|
Static | 6526 (450) |
pH | |
---|---|
Minimum | 0 |
Maximum | 14 |
Tests conducted by Yarmouth Research and Technology Maine USA
Qualify packing Style 2236 for fire resistance when applied to valves subjected to direct flame.
API STANDARD 607 SIXTH EDITION
Packing 2236 has successfully completed the test reaching comfortably the requirements of this standard.
To qualify packing style 2236 for low fugitive emissions in valves when subjected to thermal and mechanical cycles. Leak detection method "EPA method 21".
5 thermal cycles at room temperature and up to 260°C. Leak measurements performed before and after each thermal cycle and every 100 cycles of the stem.
Test Pressure: 600 psig (42 Kgf/cm2).
Packing 2236 presents the best results in fugitive emissions control averaging 2 PPMv without any adjustment of the gland and it outperformed all competitors in test performed in the Yamouth Research and Technology, in Maine/USA, as shown in the graphs below.
Product Dimensions: Cross Section: 1/4(0.25) Inches (0.635Cm), Spool Weight: 2 lb. (0.9Kg.) , Approximate Yield: 1.5 ft. Per pound +/- 10 percent
TEADIT® Specifications: TEADIT® Teadit Style 2236 Compression Packing Data Sheet
Amazon Part Number (ASIN): B01DJ7D69M